Alle Preisse inkl. 20% MwSt.
  Startseite » Katalog » DJI Lightbridge + lightbridge 2 » LightBridge Mein Konto  |  Warenkorb  |  Kasse   
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Hersteller
Kategorien
Sale - Huge Rebates:
TX, rc sets
receivers
servos
BLDC ESCs
BLDC Motors
batteries
Chargers
Power Suppliers
rc airplanes
FPV
simulators
Cases
rc cars
rotor blades
el. stabilisers, flybarless sets
gaui 200 SD diely
governory, limitery,,,
gyroscopes, tail servos->
maxir diely a tuningy
protos (500) diely
raptor 50 diely a tuningy
vision 50 competition diely
atom 500 diely
knight 600E diely
knight 50 3D diely
knight 50 Sport diely
t-rex 250 diely
t-rex 450 a ronin diely->
t-rex 450 pro diely
t-rex 500 diely
t-rex 600N diely
t-rex 600 diely->
t-rex 700N diely
heli accessories
heli motory a ND
heli mufflers
heli canopies, fuselages->
4D systems
LCD
airplane Engines
------
info, FAQ
------
laws
------
MikroKopter (aerial foto)
MikroKopter accessories
MikroKopter Spare Parts->
MikroKopter Telemetry
MikroKopter - popisy
------
Pro Equipment
cameras and camcorders
gimbals and sh.releases
dampening
batteries
chargers, power supplies
Cooling
Motors
Propellers
ESCs
Outdoor Transporting Cases
------
JR PROPO DMSS
JR PROPO XBus
JR PROPO DSM2
JR PROPO FM 35MHz, 40MHz
JR PROPO flybar less
JR PROPO servos
JR PROPO prislusenstvo
------
sky-hero Little Spyder
sky-hero Spy
sky-hero Spyder
sky-hero Spyder 6
------
FY DOS,FY 90PRO,FY 30A,FY 20A
T-Motor motory, regle, vrtule,,,
DJI motors, ESCs, propellers
racing multi rotor copters
DJI Lightbridge + lightbridge 2
DJI Naza, Naza Lite
Zenmuse XT
DJI RONIN & OSMO gimbals
DJI MG-1
DJI Matrice 100 & 600
DJI Inspire 1 + i1 Pro + i1 RAW
DJI Inspire 2
DJI X3, X5, X5R, DJI FOCUS
DJI Mavic
DJI Phantom 3
DJI Phantom 4
DJI Phantom 4 PRO
DJI Phantom 2
DJI Phantom RTF
DJI F450,F550,NAZA,H3-3D
DJI F450 spare parts
DJI F550 spare parts
DJI A3,S1000+,S900,ZenMuse
L.A.Heli nanokopter
mQX BNF and spares
QuadroControl
------
UHF Long Range systems
FPV stabilizers & autopilots
Cinemizer OLED
GoPro HD
FlyCamOne, CamOne Infinity
FPV kamery
camera holders for models
HDMI cables, converters
AV Transmitters & Receivers
antennas 5.8GHz
AV goggles 2D, 3D
AV monitors
DVR
head tracking
telemetria
OSD, On Screen Display
GPS, kompasy,,
FPV simulators
R/C simulators->
--------
cnc->
3d printers
ABS, PLA,,,
spare parts
--------
Raspberry Pi
Arduino hardware
Arduino popisy
books
Gameduino
Netduino
PcDuino
mbed
Beagle Boardy
Electric Imp
Maple
Elecrow
-------
development boards
programmers/debuggers
ARM
ARM A8+
AVR
PIC/dsPIC/PICAXE
FPGA
XMOS
parallax
-------
UAV, IMU, AHRS
akcelerometre
gyroskopy
GPS
compasses (magnetometers)
altimeters (barometric)
temperature, humidity
SD, loggery
ultrasonic
infrared, PIR
light
pressure/flex
kamery
vibrations
biometric
ID
radioactivity
-----
roboty
RC-SOCCERBOT spare parts
hexapod spare parts
stepper motors
servos, motors, wheels
stepper motor controllers
ovladanie serv, PWM
motor Controllers
Relays Controlling
-------
Android
iPhone, iPad, iPod
Wii
-------
XBee 2.4GHz & 868MHz
Nordic 2,4GHz
bluetooth (2,4GHz)
WiFi 802.11 (2,4GHz)
434 MHz
868 MHz
GSM, GPRS
ethernet
USB
CAN, EBD
I2C
magnet.sensors
Smart Cards
RFID
RTC moduly
VGA & video
LED, RGB LED
D/A prevodniky
logic level converters
generators
mp3, midi, audio
voice recognition
buttons, joysticks
power sup., solar cells, accus
------
breadboards+wires
break out boards
components
headers, connectors
-------
dištančné stĺpiky
plastic screws & nuts
------
osciloskopy
logic analysers->
meracie hroty, kable
-------
Airtop
mini PC->
--------
rc sets, servos,,,->
rc helicopters->
Pitlab SkyAssistant
batteries, chargers->
ball & axial bearings
palivo
--------
motors, engines,,,->
balsa, carbon, EPP->
DJI LightBridge, video downlink + rc control uplink, 2.4GHz, IN STOCK 1199,00EUR 790,00EUR



Hot new item for June 2014 (original DJI plan was to release Lightbridge in March 2014) - DJI LightBridge 2,4GHz HD/FullHD video and telemetry down link (compressed video, not RAW video) and at once the control command uplink from the rc transmitter to the drone.

Interesting system which works in ISM 2.4GHz band - small Lightbridge AIR (to be installed in e.g. rc model) and bigger Lightbdridge Ground module. Video (PAL/NTSC composite or HDMI) is transmitted as the digital data from Lightbridge AIR module to Lightbridge Ground module (to HDMI monitor or HDMI video goggles or to smart phone/tablet) and at once the control commands are transmitted from one or two rc transmitters connected by the trainer port to Lightbridge Ground module to Lightbridge AIR module. Alternatively you can use rc set which work in 5.8GHz (DJI Phantom 2 Vision Plus or DJI FC40) or UHF or FM band and LightBridge will be used for the video down link from Lightbridge AIR module (e.g. from rc model) to Lightbridge Ground module.

DJI Lightbridge video down link has low latency (plus minus 170ms glass to glass) and as it compress the video stream (the manufacturer does not specify what kind of the video compression is used) the operating range declared by the manufacturer is up to 1,7km HD video (720p) and up to 600 meters FullHD video (1080p) with the included 5dBi antennas on Lightbridge Ground module.

DJI Lightbridge can communicate with DJI WKM/A2/NAZA V2 (using the electronics modules from us also with other brand electronics) to transfer also the telemetry data and it can show the basic telemetry as OSD info, therefore it is not needed to use the external OSD module in contrast to analog video down link. Lightbridge AIR module connects to DJI CAN BUS of DJI Flight Controller. It is possible to switch off OSD on HDMI output using DJI Lightbridge iOS/Android Application.

The manufacturer marketing is not the best declaring that Lightbridge works with DJI Flight Controllers only, DJI Lightbridge is HD/FullHD video down link which works as the stand alone system (not needed DJI A2/WKM/Naza 2) - you can connect HDMI monitor to Lightbridge Ground module and the battery and PAL composite/HD/FullHD video to LightBridge AIR module to get the digital video down link system (wireless video down link from the camcorder, wireless security camera system to monitor the sensitive areas like Secret and Top Secret areas as Lightbridge uses the video stream encryption - unauthorized persons are unable to see the wireless video in contrast to the analog video trasmitters). Of course in such cases you see no OSD info and you can disable OSD in HDMI using DJI Lightbridge iOS/Android application.

Lightbridge fully supports JR PROPO XG14 and other JR PROPO rc transmitters


Lightbridge AIR module (for rc model for example) has PAL/NTSC composite video input or HDMI video input which supports the most common progressive and interlaced HD and FullHD video - 720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30, 1080p50, 1080p60.

Lightbridge AIR module has D-BUS output to control the drone (the manufacturer declares that only for NAZA V2/WKM/A2, but we will manufacture the electronics to use it in other drones too).

Lightbridge AIR module needs the external power supply battery (the most often the rc model power LiPo) with the voltage 11V-26V (3S LiPo-6S LiPo) and it consumes ca. 8W, dimensions ca. 67 x 47 x 20 mm and weight ca. 70 grams.



DJI Lightbridge Ground module has HDMI and USB video outputs - HDMI for HDMI video monitor or HDMI video goggles and USB for smart phone/tablet. It is not possible to use both video outputs at once - HDMI video output has the higher priority.

DJI Lightbridge Ground module has the input for one or two rc transmitters - one up to 16 channels to control the drone or two rc transmitters while the first TX uses 8 channels to control the drone and the second TX uses 8 channels to control the DJI Z15 gimbal. Control signals are transmitted from Lightbridge Ground module to Lightbridge AIR module which has the D-BUS output for e.g. DJI NAZA V2/WKM/A2 flight controllers.

It is possible to use more (max 8) DJI Lightbridge Ground modules in SLAVE model with one DJI LIghtbridge AIR module at once. We also stock the DJI Lightbridge Ground modules alone.

DJI Lightbridge Ground module has the built-in 2-cells LiPo battery with the capacity of 4000mAh, which provides the working time of up to 4 and half hours plus it also has the conector for the external power battery 11-26V (3S-6S LiPo), dimensions ca. 125 x 89 x 20 mm and weight ca. 360 grams.


DJI LightBridge has CE/FCC certification, so this mean this is the first DJI legal video down link system for EU market - in contrast to DJI analog video transmitter AVL58, which is ILLEGAL in Europe, the same as in EU ILLEGAL DJI telemetry which works in USA telemetry band 900MHz (Until now DJI does not have EU version using 868MHz band and it seems dji will never have it as Lightbridge will be the main system to transfer the video and telemetry info...).



In stock in Kosice.


The first shipment was planned for late mach 2014... But it was here in June 4th 2014...
First batch sold out June 4th 2014.
Second batch sold out June 13rd 2014

I am DJI distributor since 2011

In 2011 DJI had have wookong-H and wookong-M only plus older generations of the flight controllers, F450/F550 in January 2012 and then S800 during the Summer 2012, Phantom 1 in January 2013 and Phantom 2 and zenmuse H3-2D and Phantom 2 Vision during the Summer 2013, lightbridge, zenmuse H3-3D, S900, Ronin, S1000+ and Inspire 1 in 2014.


This product was added to our catalog on Saturday, 12. September 2015.


Sprachen
slovensky English po Russki de Polski Magyar
Währungen
Informationen
Privacy Notice
Unsere AGB
Kontakt
Warenkorb
ist leer.
Specials
Align H50034 tail rotor assembly f. t500, the last one
Align H50034 tail rotor assembly f. t500, the last one
15,24EUR
7,50EUR
Neue Artikel
Align H50056 canopy nuts 4pcs f. t500, the last 2pcs
Align H50056 canopy nuts 4pcs f. t500, the last 2pcs
4,68EUR
2,00EUR

Copyright © 2004-2014 Ing. Miroslav VASILKO
Dieser Online-Shop basiert auf osCommerce